Standards

Search Results

Standard List

Ontario Provincial Standards
Region of Durham
- Construction Specifications
- Standard Drawings
  - S-100 Series - Storm and Sanitary Sewers
  - S-200 Series - Watermain
    - RMDSD S-200.010 Sanitary, Storm and Water (Main and Service) Pipe Bedding and Concrete Encasement Details
    - RMDSD S-200.020 Trench Restoration Detail
    - RMDSD S-200.030 Supports for Watermain, Sewers, Piping and Conduits Crossing Trenches
    - RMDSD S-200.040 Concrete Trench Plugs for PVC and Rigid Pipe (Watermains and Sewers)
    - RMDSD S-200.050 Joint Restraining Length for PVC Pipe (in Combination with Granular Thrust Block)
    - RMDSD S-200.060 Thrust Block for PVC Watermains for Hydrant Runouts, Tees and Dead Ends
    - RMDSD S-200.070 Deflection of Watermain Over ad Under Sewer
    - RMDSD S-200.080 Pipe Casing
    - RMDSD S-200.090 Watermain Trench Detail Under Water Course
    - RMDSD S-201.010 Replacing Buried AC or Grey Iron Watermain
    - RMDSD S-201.020 Water and Sewer Mains Location Sign
    - RMDSD S-201.030 Cathodic Protection/Bonding Cable/Tracer Wire for PVC and CPP Watermain Systems
    - RMDSD S-201.031 Cathodic Protection/Bonding Cable for Existing Ferrous Watermain Systems
    - RMDSD S-201.050 Test Point and Flushing Configuration for Large Diameter Feedermain
    - RMDSD S-210.010 Hydrant Set with Mechanically Restrained Joints
    - RMDSD S-210.020 Hydrant Barrier
    - RMDSD S-210.030 Hydrant Access Across Ditch
    - RMDSD S-210.040 19 mm Test Point By-Pass Less Than 400 mm
    - RMDSD S-210.041 Temporary Valve By-Pass Arrangement
    - RMDSD S-210.060 50 mm Blowoff
    - RMDSD S-210.070 Water Sampling Station
    - RMDSD S-210.080 Automatic Flushing Device
    - RMDSD S-220.010 100 mm to 400 mm Gate Valve, Valve Box and Tracer Wire Arrangment for PVC or CPP Watermain
    - RMDSD S-220.020 Butterfly Valve and Valve Box (400 mm to 500 mm CPP)
    - RMDSD S-220.030 400 mm Butterfly Valve and Valve Box (other than CPP Watermain)
    - RMDSD S-220.031 600 mm Butterfly Valve and Precast Concrete Chamber
    - RMDSD S-220.040 Valve Stem Extension and Bracket
    - RMDSD S-220.050 Air Valve & Access Chamber (for Watermains up to 750 mm)
    - RMDSD S-220.051 Air Valve & Access Chamber (For Watemains 900 mm to 1500 mm)
    - RMDSD S-220.060 Drain Valve in Chamber 100 mm, 150 mm and 200 mm
    - RMDSD S-230.010 Sevice Connection Location Single Family Residential Lots (New Connections)
    - RMDSD S-230.011 Piping & Fittings for Commercial, Industrial & Multi-Residential Connections (Domestic & Fireline)
    - RMDSD S-230.020 19 mm and 25 mm Copper Watrer Service
    - RMDSD S-230.021 37 mm and 50 mm Copper Water Service
    - RMDSD S-230.030 Water Service Box Cap
    - RMDSD S-230.031 Water Service Box
    - RMDSD S-240.010 Meter, Valve, Pro Read Arb Receptical and Wire Installation
    - RMDSD S-240.020 Water Meter Room Layout
    - RMDSD S-240.030 Incoming Water Service and Meter Schematic (Fireline Off Single Feed) Sprinkler System
    - RMDSD S-240.040 Backflow Prevention Room or Building Layout Private Hydrant and Sprinkler System
    - RMDSD S-240.041 Combined Meter Room, Backflow Prevention Device Room Layout Private Hydrant and Sprinkler System
    - RMDSD S-240.050 Backflow Prevention Room or Building Layout Sprinkler System
    - RMDSD S-240.051 Combined Meter Room, Backflow Prevention Device Room Layout Sprkinler System
    - RMDSD S-240.060 Seasonal Use Water Meter Cabinet
    - RMDSD S-240.061 Water Meter Pit Setter (19 mm to 25 mm Meter)
  - S-300 Series - Roads
  - S-400 Series - Traffic Signals
  - S-500 Series - Transit
City of London
Ontario Statutes, Regulations, etc
ASTM International
Canadian Standards Association
Other Standards

Region of Durham > Standard Drawings > S-200 Series - Watermain > RMDSD S-200.050 - Joint Restraining Length for PVC Pipe (in Combination with Granular Thrust Block)

RMDSD S-200.050

Name:	Joint Restraining Length for PVC Pipe (in Combination with Granular Thrust Block)
Code:	RMDSD S-200.050
Description:
Type:	Drawing
Version:	Rev 6
Date:	2013-04-30
Document:	View Standard