AASHTO M324-12-UL Standard Practice for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
AASHTO M325-08-UL Stone Matrix Asphalt (SMA)
AASHTO M326-08-UL Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter
AASHTO MP015-09-UL Use of Reclaimed Asphalt Shingles as an Additive in Hot-Mix Asphalt
AASHTO MP018MMP018-09-UL Uncoated, Corrosion-Resistant, Deformed and Plain Alloy, Billet-Steel Bars for Concrete Reinforcement and Dowels
AASHTO MP019-10-UL Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
AASHTO NTPEP Evaluation Centre Ohio Research Institute for Transportation and the Environment (ORITE) Centre for Pipe and Underground Structures (CPUS)
AASHTO NTPEP-1 National Transportation Product Evaluation Program (NTPEP)
AASHTO R018-10-UL Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
AASHTO R028-12-UL Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
AASHTO R029-08-UL Grading or Verifying the Performance Grade (PG) of an Asphalt Binder
AASHTO R031-09-UL Standard Practice for Evaluation of Protective Coating Systems for Structural Steel
AASHTO R035-12-UL Superpave Volumetric Design for Hot-Mix Asphalt (HMA)
AASHTO R046-08-UL Designing Stone Matrix Asphalt (SMA)
AASHTO R049-09-UL Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders
AASHTO R056-10-UL (former provisional PP 49) Standard Practice for Certification of Inertial Profiling Systems
AASHTO R060-12-UL Sampling Freshly Mixed Concrete
AASHTO RSDG-3 Roadside Design Guide
AASHTO T002-91-UL (2010) Sampling of Aggregates
AASHTO T011-05-UL Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
AASHTO T019M/T019-09-UL Bulk Density ("Unit Weight") and Voids in Aggregate
AASHTO T022-10-UL Compressive Strength of Cylindrical Concrete Specimens
AASHTO T022-10-UL Compressive Strength of Cylindrical Concrete Specimens
AASHTO T023-08-UL Making and Curing Concrete Test Specimens in the Field
AASHTO T027-11-UL Sieve Analysis of Fine and Coarse Aggregates
AASHTO T040-02-UL Sampling Bituminous Materials
AASHTO T044-03-UL Solubility of Bituminous Materials
AASHTO T048-06-UL Flash and Fire Points by Cleveland Open Cup
AASHTO T049-07-UL Penetration of Bituminous Materials
AASHTO T053-11-UL Softening Point of Asphalt Binder (Ring and Ball Apparatus)
AASHTO T055-02-UL (Withdrawn) Water in Petroleum Products and Bituminous Materials by Distillation
AASHTO T059-12-UL Testing Emulsified Asphalts
AASHTO T084-10-UL Specific Gravity and Absorption of Fine Aggregate
AASHTO T085-10-UL Specific Gravity and Absorption of Coarse Aggregate
AASHTO T088-10-UL Particle Size Analysis of Soils
AASHTO T089-10-UL Test for Determining the Liquid Limit of Soils
AASHTO T090-00-UL Determining the Plastic Limit and Plasticity Index of Soils
AASHTO T096-02-UL Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
AASHTO T099-10-UL Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
AASHTO T104-99-UL Soundess of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
AASHTO T119MT119-11-UL Slump of Hydraulic Cement Concrete
AASHTO T132-87-UL Tensile Strength of Hydraulic Cement Mortars
AASHTO T157-12-UL Method of Test for Air-Entraining Admixtures for Concrete
AASHTO T166-12-UL Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
AASHTO T176-08-UL Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
AASHTO T196MT196-11-UL Air Content of Freshly Mixed Concrete by the Volumetric Method
AASHTO T209-12-UL Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt Paving Mixtures
AASHTO T237-05-UL Testing Epoxy Resin Adhesive
AASHTO T240-09-UL Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
AASHTO T250-05-UL Thermoplastic Traffic Line Material
AASHTO T259-02-UL Resistance of Concrete to Chloride Ion Penetration
AASHTO T260-97-UL Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
AASHTO T275-07-UL Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
AASHTO T277-07-UL Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
AASHTO T283-07-UL Resistance of Compacted Hot-Mix Asphalt (HMA) to Moisture-Induced Damage
AASHTO T288-12-UL Test for Determining Minimum Laboratory Soil Resistivity
AASHTO T289-91-UL Test for Determining pH of Soil for Use in Corrosion Testing
AASHTO T290-95-UL Test for Determining Water-Soluble Sulfate Ion Content in Soil
AASHTO T291-94-UL Test for Determining Water-Soluble Chloride Ion Content in Soil
AASHTO T300-11-UL Force Ductility Test of Asphalt Materials
AASHTO T301-11-UL Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
AASHTO T304-11-UL Uncompacted Void Content of Fine Aggregate
AASHTO T305-09-UL Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
AASHTO T307-99-UL Determining the Resilient Modulus of Soils and Aggregate Materials
AASHTO T312-12-UL Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AASHTO T313-12-UL Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T314-12-UL Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
AASHTO T315-12-UL Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T316-11-UL Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T336-11-UL Coefficient of Thermal Expansion of Hydraulic Cement Concrete
AASHTO TF25-1-UL Guide Specifications for Geotextiles in Separate Applications (does not represent current technical information)
AASHTO TF36-1-UL Fiber Reinforced Concrete
AASHTO TP059-00-UL Determining Air Content of Hardened Portland Cement Concrete by High-Pressure Air Meter
AASHTO TP070-12-UL Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP087-10-UL Measure Low Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
AASHTO TP096-11-UL Method of Test for Protective Sealers for Portland Cement Concrete
American Concrete Institute
American National Standards
American Society of Mechanical Engineers
American Water Works Association
Bureau de Normalisation du Québec
Canadian Council of Independent Laboratories
Comité Européen de Normalisation/European Committee for Standardization/Europaisches Komitee fur Normung
Canadian General Standards Board
Canadian Acts and Regulations
Factory Mutual
Goods and Services Identification Number
International Concrete Repair Institute
Institute of Electrical and Electronics Engineers
International Organization for Standardization
International Slurry Surfacing Association
National Council Highway Research Program
National Master Specification
Standards of accredited organizations or other agencies
Strategic Highway Research Program
Society for Protective Coatings
Underwriters Laboratory Inc.
Underwriters' Laboratories of Canada
Other Standards
>
American Association of State Highway and Transportation Officials
>
AASHTO T277-07-UL - Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
AASHTO T277-07-UL
Name:
Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
